Hose End Type Injector Cleaning and Flow Testing
$22.00
Current Turnaround time: 3-5 Days
Please Print your invoice and include it with your shipment **
Further Shipping Instructions can be found HERE
***PLEASE READ***
This item includes service for ONE HOSE END TYPE injector. Please set the quantity to the number of injectors you need serviced.
Basic Cleaning and Flow Test Service: Example Sheet
Service to include the following:
Coil Check (Ohm) |
Static Flow Test (Volume) |
Leak Down Test @ 100psi |
Internal Lubrication |
Spray Pattern Analysis |
Injector Numbering |
RPM Ramp Test (to 10K RPM) |
Individual Bagging |
Pulse Width Ramp Test (to 18 ms) |
Comprehensive Flow Report |
3 Step Cleaning Process |
Balance Report |
Replace all Serviceable Parts (Pintle caps, O-Rings, Grommets)* |
Data Sheet Saved at Injector-Rehab for 1 year and can be requested at any time. |
To view the EXAMPLE sheets, you must have Adobe reader installed on your computer.
*Injectors MUST be stripped down to remove the hose before sending in. If you are not able to remove the hose, an additional charge will apply and can be added as an option at the bottom of the page.
This item is NOT for Diesel, GDI, Piezoelectric, CIS, CPI or SCPI Injectors
This item is for Service of Hose End Type Fuel Injectors ONLY.