Optimax Air Injector Cleaning and Flow Testing
This item includes service for one Mercury Optimax Air Injector. Please set the quantity to the number of injectors you need serviced. There is a 2 injector minimum.
If you require replacement components (o-rings and Combustion Seal), this is an additional cost and can be added to your order at a discounted rate.
The Mercury Optimax uses a very unique and intricate injection system. The system requires not only the use of a fuel injector, but in addition it uses an Air Injector. Both fuel and air flow through the same rail. The fuel injector are mounted to flow the fuel INTO the air injector. From there, the Air injector is mounted as if it were a GDI injector. Directly into the cylinder to burn the mixture and the correct time to be ignited for optimal power. The systems need to work in perfect harmony for the system to work. Not only are the fuel injectors subject to the same issues the higher Ethanol content fuel causes, so are the Optimax Air Injectors.
The Optimax Air Injector is fed via a belt driven Air Compressor. Because it is injecting pressurized air and fuel from his counterpart fuel injector, these are a VERY important component that must be working 100%. Our service will provide you the ability to bring these back to life.
It must be noted that these injectors DO have a higher than normal failure rate. When an Air Compressor has issues or fails, the debris ends up in the Optimax Air Injector and can cause catastrophic failure of the injector.
If this is the case, we do offer complete ready to install Optimax Air injectors. Availability depends on our current stock. Summers tend to be the time we have a higher demand and are more often sold out. Inventory is kept up to date, so check back frequently.
Flow tested Ready to Install Blue Optimax Air Injectors
Flow tested Ready to Install Black Optimax Air Injectors
This item is for Service of Optimax Air Injectors ONLY.
Fuel Injector Testing should use our Side Feed Port Injector Service